# Broadband Outdoor Infrastructure

### Overview

Welcome to the EnGenius Broadband Outdoor Resource Center. This section focuses on the **EOC Series**, specifically engineered for Wireless Internet Service Providers (WISPs), Smart Cities, and Industrial Security. These high-performance 802.11ax (Wi-Fi 6) radios are designed for long-range Point-to-Point (PTP) and Point-to-Multipoint (PTMP) connectivity in challenging outdoor environments.

***

### System Installation & Regulatory Compliance

{% hint style="info" %}
Procedures for physical deployment, environmental hardening, and RF safety.
{% endhint %}

* [**Hardware Installation and Mounting Guide**](https://doc.engenius.ai/home-eoc655-user-manual/initial-setup-and-configuration/product-overview)
  * **Overview**: Detailed instructions for wall and pole/tower mounting, IP67-rated enclosure sealing, and professional antenna alignment.
  * **Requirement**: Hardware installation must be performed by certified RF professionals to ensure structural integrity and operational safety.
* [**Safety and Regulatory Compliance**](https://doc.engenius.ai/home-eoc655-user-manual/introduction/safety-and-regulatory-information)
  * **Scope**: FCC Part 15.407 compliance (FCC-ID: A8J), EIRP limit calculations, and mandatory antenna separation requirements (minimum 250cm).
  * **Objective**: Ensure legal operation within the unlicensed spectrum and mitigate interference with co-channel satellite services (NGSO/MSS).

***

### Radio & Wireless Configuration

{% hint style="info" %}
Parameters for spectral efficiency and high-density throughput optimization.
{% endhint %}

* [**EOC655 User Manual: Wireless Settings**](https://doc.engenius.ai/home-eoc655-user-manual/configuration-settings/system-configuration)
  * **Technical Specs**: Configuration of Radio 1/Radio 2 (5GHz) and the 2.4GHz management interface. Covers 1024-QAM modulation, MU-MIMO, and spatial stream allocation.
  * **Performance**: Strategies to achieve aggregate data rates up to 2.4 Gbps across varied PTP/PTMP topologies.
* [**Link Protocol & Radio Resource Management (RRM)**](https://doc.engenius.ai/home-eoc655-user-manual/configuration-settings/system-configuration#device-operation-point-to-point-protocol)
  * **Operational Logic**: Analysis of the proprietary polling protocol, BSU/SU registration workflows, and Traffic Shaping policies.
  * **Advanced Optimization**: Implementation of Adaptive Transmit Power Control (ATPC) and Dynamic Channel Selection (DCS) for noise immunity.

***

### Network Integration & Management

{% hint style="info" %}
Layer 2/3 configuration and administrative service provisioning.
{% endhint %}

* [**Network Configuration Guide**](https://doc.engenius.ai/home-eoc655-user-manual/configuration-settings/network-configuration)
  * **Procedures**: VLAN modes (Transparent, Trunk, Access), IPv4 addressing (Static/DHCP), and MTU optimization for backhaul efficiency.
  * **Connectivity**: Managing dual-LAN ports (up to 2500 Mbps) and MTU size optimization for high-throughput backhauls.
* [**System Management & Services**](https://doc.engenius.ai/home-eoc655-user-manual/management-monitoring-and-troubleshooting/general-management)
  * **Capabilities**: SNMP monitoring, SSH/HTTP secure access, NTP time synchronization, and temperature logging.

***

### Operational Support & Troubleshooting

{% hint style="info" %}
System maintenance, firmware lifecycle management, and diagnostics.
{% endhint %}

* **Firmware & Backup Procedures**
  * **Key Topics**: Local and Auto-Upgrade functionality, configuration backup/restore, and factory reset parameters.
* **Diagnostics & Site Survey Tools**
  * **Key Topics**: Running performance tests (Server/Client mode), interpreting Link Statistics, and performing Site Surveys to join the optimal Access Point.

***

### Related Platforms & References

* [**EnGenius Cloud**](https://doc.engenius.ai/engenius-cloud-overview/) — Public cloud (SaaS) centralized management platform
* **Device Documentation** — Hardware specifications and device-level capabilities
* **Security & PSIRT** — Security advisories, vulnerability disclosures, and mitigation guidance


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://doc.engenius.ai/broadband-outdoor-overview/broadband-outdoor-infrastructure.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.