# EWS276-FIT

## v1.0.68

### \[Issue Fixed]

* Fixed a connection issue where the EWS276-FIT might lose connection with the EWS7952FP-FIT switch during link detection.

## v1.0.67

### \[Issue Fixed]

* Improved WiFi stability for client association with AP

## v1.0.65

### \[New Features]

* Suppoer EnGenius Private Cloud (EPC).
* Remove Green Mode configurations in local GUI.

## v1.0.51

### \[Issue Fixed]

* Fix command injection vulnerability in tools page of local GUI.
* Resolve the issue where mDNS forwarding is not working properly.
* Fix the vulnerability issue specified in [CVE-2024-9504](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-9504)

## v1.0.50

### \[Issue Fixed]

* Resolve the issue where the default manament interface (ENMGMT SSID) in local GUI is still accessable after the device is registered with FitCon or FitXpress that makes user connect to this SSID but cannot go anywhere.
* Resolve wrong client RSSI value displayed in UI.

## v1.0.49

### \[Issue Fixed]

* Resolve traffic loss issue caused by egressing traffic via the Ethernet interface.
* Resolve the issue where, when the Channel Width is set to 80MHz in Auto Channel mode, the AP will only operate on Channel 40.

## v1.0.45

* Support application DSCP tagging.

## v1.0.40

* Supports multiple languages of system name in LSP.
* Update the style of the LSP/Standalone web GUI.
* Fingerprint supports more OS types.
* Fixed AP offline caused by UTF8 decode of device name.
* Fixed the certificates sometimes disappear after device firmware upgrade.
* Supports website filtering.
* Supports PSTI certification requirements.
* Supports Mesh operation mode.
* Supports Station operation mode in standalone mode.
* Supports Repeater operation mode in standalone mode.
* Mesh mode, Station mode and Repeater mode support VLAN pass-through.

## v1.0.14

* Enhance synchronization between the AP and the controller.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://doc.engenius.ai/engenius-fit-release-note/hardware/access-point-firmware/ews276-fit.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.