> For the complete documentation index, see [llms.txt](https://doc.engenius.ai/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://doc.engenius.ai/fitcon100_um/configuring-networks/general-settings.md).

# General Settings

General settings allow you to configure Network settings, AP network-wide settings and so do Switches. Click **Configure** >  **General Setting** to access this screen.&#x20;

<figure><img src="https://2151473698-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F2YGYl5TQ7IhZchwv09Ji%2Fuploads%2FchOvSJwsaIk1sbrwC9AK%2Fimage.png?alt=media&amp;token=6783284c-457a-47ed-ad7e-b7c4d68f19c5" alt=""><figcaption></figcaption></figure>

## Edit Network

**Network name**, **country**, and **timezone** can be edited as needed. Follow the steps below to edit a network.

<figure><img src="https://2151473698-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F2YGYl5TQ7IhZchwv09Ji%2Fuploads%2F9Hm9lNCcPz8rKN1wLFrE%2Fimage.png?alt=media&amp;token=798defb8-a896-47a4-b132-55c4810a3c3e" alt=""><figcaption></figcaption></figure>

1. Click edit button to change network name
2. Select Country, Timezone, and then click **Apply**

&#x20;   &#x20;

### Local Credential&#x20;

This feature allows you to configure the login account of local web GUI for devices. The settings here apply to all APs and Switches in this Network .

<figure><img src="https://2151473698-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F2YGYl5TQ7IhZchwv09Ji%2Fuploads%2FepyPNFBjUfqUhIIN2qkN%2Fimage.png?alt=media&amp;token=31a9a06f-7c61-461e-9e8d-e465e444bb0f" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}
Note that username and password could be blank if you don't want to change device login account of local web GUI.
{% endhint %}

## Edit AP

<figure><img src="https://2151473698-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F2YGYl5TQ7IhZchwv09Ji%2Fuploads%2FfYyGVCHDa9QO0UHjh1fM%2Fimage.png?alt=media&amp;token=8fdbdb27-83b3-4588-9338-501db31a898a" alt=""><figcaption></figcaption></figure>

### LED Light

This allows you to enable all AP's LED lights in the current network.

![](https://2151473698-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LgVsoqihVR3I0VRYmyO%2F-MGaIDizVXyXG0Y1I7VN%2F-MGaO3l8pvQ26zS3q0Ur%2F1599445614941.jpg?alt=media\&token=8b073fff-c6fe-4576-bd0b-ccf306f17782)

### Syslog Server

This settings can let users remotely log **Syslog** events from a managed AP device to your external logging server.

&#x20;You can enable and configure the logging feature from **Configure → General setting→ Syslog server**.

* **Status**: Enable to open the function to the remote system log.&#x20;
* **Log server address**: Specify the IP address or hostname of the Syslog server.
* **Log server port:** Specify the port of the Syslog server. The default port is 514.

![](https://2151473698-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F2YGYl5TQ7IhZchwv09Ji%2Fuploads%2FXpgVXxFm5HYlhW2lqsiZ%2Fimage.png?alt=media\&token=abb715bf-e177-415e-99f6-fb8460bb6c02)

### Message for blocked Clients

Clients can be blocked from accessing the network. When these clients attempt to connect to the network and open a web browser, they will be redirected to a blocked message.  The Network-wide **Default block message** is configured on a per-network basis. The message is set in the **Network-wide** > **General** **Settings** > **AP** page.

![](https://2151473698-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LgVsoqihVR3I0VRYmyO%2F-MGM_NzI7Z29R3cx_kYg%2F-MGMdr0R3VUC_dXRVbf7%2F1599198267937.jpg?alt=media\&token=66ec0fca-30f9-446a-ad17-6fd483c68969)

&#x20;    The blocked splash page below will be presented below to the blocked clients.

![](https://2151473698-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LgVsoqihVR3I0VRYmyO%2F-MGM_NzI7Z29R3cx_kYg%2F-MGMeMOhnvTHAy5eyicI%2F1599198279408.jpg?alt=media\&token=5afeef7c-5311-4a79-88a4-647bc1211241)

## Advanced settings

### Presence reporting

For applications like CRM tools, presence analytics, or location-aware services which need to continuously gather presence data of wireless clients, EnGenius Acess Points are capable of delivering real-time presence data to fulfill the requirement.

EnGenius Presence Service can have managed APs continuously gathering 802.11 probe request frames sent by wireless clients and then sending the data to 3rd party servers configured in FitController.

#### Configuration

In FitController, the configuration of presence service is at&#x20;

> **General Settings** > **AP** > **Advanced Settings**

![](https://2151473698-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F2YGYl5TQ7IhZchwv09Ji%2Fuploads%2FGPK2VtXjcsF4wQdSEod2%2Fimage.png?alt=media\&token=dad27114-de24-4bb9-9b08-8a860003c146)

the following parameters can be configured on the page:

| Parameters      | Description                                                                                                                                                                  |
| --------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| Server Location | 3rd party server address                                                                                                                                                     |
| Key             | Secret used to generate a SHA256 HMAC signature, over the payload (the JSON message). The signature is then added to a custom HTTP header (“Signature”) in the POST message. |
| Interval        | The Interval between two consecutive messages has been sent.                                                                                                                 |

### **Traffic log**

Traffic log feeds wireless client info to remote Syslog server. Note that enabling this setting will severely degrade AP performance. To enable this function, the syslog server must be enabled.

## Edit Switch

![](https://2151473698-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F2YGYl5TQ7IhZchwv09Ji%2Fuploads%2FUqOizCRGXcX2gaQ84kty%2Fimage.png?alt=media\&token=47f0e5e6-6904-4e4d-9e6f-81fccd254463)

### LED Light

This allows you to enable all switches' LED lights in the current network.

![](https://2151473698-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LgVsoqihVR3I0VRYmyO%2F-MGaIDizVXyXG0Y1I7VN%2F-MGaO3l8pvQ26zS3q0Ur%2F1599445614941.jpg?alt=media\&token=8b073fff-c6fe-4576-bd0b-ccf306f17782)

### Syslog Server

This settings can let users remotely log **Syslog** events from a managed switch device to your external logging server.

&#x20;You can enable and configure the logging feature from **Configure → General setting→ Syslog server**.

* **Status**: Enable to open the function to the remote system log.&#x20;
* **Log server address**: Specify the IP address or hostname of the Syslog server.
* **Log server port:** Specify the port of the Syslog server. The default port is 514.

![](https://2151473698-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F2YGYl5TQ7IhZchwv09Ji%2Fuploads%2FXpgVXxFm5HYlhW2lqsiZ%2Fimage.png?alt=media\&token=abb715bf-e177-415e-99f6-fb8460bb6c02)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://doc.engenius.ai/fitcon100_um/configuring-networks/general-settings.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
