Logging On

Step 1: Access to the Web Page

As the default , you can login to EnGenius FitController in the following steps:

You can access the controller's web page by using the controller's DHCP-assigned IP or default IP address.

Connect to Controller via DHCP-assigned IP

1. Connect the controller to the network and ensure that your host system is on the same Layer-2 network as the controller.

2. Check the DHCP server for the controller's IP address, and enter the IP on your browser's address bar to access the device's user interface.

Connect to Controller via Default IP

1. Connect the controller to your computer and ensure its IP address is in the same subnet.

2. Under your web browser, enter the URL: http://192.168.1.250:8080 to access the device's user interface.

This will bring up the main login page.

Step 2: Create Account and Log In

Create your own account and password to log in to the controller's local web page.

Step 3: Configure and Manage the Device

After logging in to the device's local web page, navigate to the left side menu to configure and manage the controller accordingly