# ECP214/ECP212-INT

## v1.0.30

### \[New Features]

**1. Auto Reboot Functionality Optimization**

* Added the **Host Condition** function to ensure that host detection failures are not caused by intermediate network nodes, enabling more accurate identification of abnormal host IP status (local GUI only).
* Added automatic restart for AutoReboot: when an outlet reaches the reboot attempt limit, Auto Reboot will automatically restart host monitoring after 24 hours, **eliminating** the need for **manual** intervention.
* Added and optimized **Event Logs**.

**2. Event Log Page Optimization** (**local GUI ONLY**)

* Improved the filtering interface and display for better usability.

## v1.0.25

### \[New Features]

* The Support **Rollback Configuration** feature allows devices to revert to the previous configuration in case of disconnection caused by an incorrect configuration pushed from EnGenius Cloud.
* For easier troubleshooting, add a **Ping Failed event log** for the AutoReboot feature.
* Enhance the **Never Power Off** feature: when **Never Power Off** is enabled, **AutoReboot** and **Schedule** cannot be enabled (local GUI only).

## v1.0.20

### \[New Features]

* Support the new model ECP212-INT.
* Support enable/disable HTTPs-only for local web page access. Allowing users force web UI access encrypted for better security.
* Support enable/disable Local Web Page. Allowing users forbid local managements to prevent the confliction with the central cloud management.
* Add Retry and Reset options to AutoReboot, increasing the flexibility of device power management.
* Support synchronize "Schedule" configurations in local GUI to Cloud when PDU first time check in Cloud.
* Add a new event log when PDU detects outlet has no power supply after AutoReboot.
* Add new event logs for firmware upgrade. 
* Configurations made via LCD will be kept even device reboot.
* Support displaying the Serial Number and Local Web Page on/off status on the LCD.

## v1.0.15

* Provide email notification in case the connected device loses power from Auto-rebooting.

## v1.0.10

* Improved the voltage safe range to accommodate varying default settings across different countries.

## v1.0.7

* Fixed the issue to let event log record AMP safe range when exceeding configuration range. 
* Fixed the issue to let event log record the configured safe range of power and current. 
* Fixed the issue to correct the testing email's sending errors.

## v1.0.5

* Extend Outlet and User Name Length to 64. 
* Add org license function. 
* Modify default max amp current from 4A to 12A.
* Add schedule time slider in local GUI page.

## v1.0.0

* This f/w version is for the first release. 

##