> For the complete documentation index, see [llms.txt](https://doc.engenius.ai/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://doc.engenius.ai/home-engenius-qsg-library/engenius-cloud-qsg/cloud-switch/ecs8830f.md).

# ECS8830F

## Introduction

This Quick Start Guide is designed to guide you through the installation and initial configuration of the **CloudSwitch Core 30**, model **ECS8830F**.

{% hint style="info" %}

## <mark style="color:$primary;">CloudSwitch Core 30</mark>

### Cloud Managed 24x SFP+ + 6x QSFP28 L3 Switch

#### Model:  ECS8830F

* 24 × 10G SFP+ ports
* 6 × 100G QSFP28 uplink ports
* EnGenius Cloud management support
* Local Web GUI management support
* Enterprise Layer 2 / Layer 3 networking capabilities
  {% endhint %}

<details>

<summary><mark style="color:blue;"><strong>Content Quick Links</strong></mark></summary>

[**Hardware Installation**](#hardware-installation)

[**Management Plane**](#management-plane)

[**Option A: Cloud Management**](#option-a-configure-with-engenius-cloud)

[**Option B: Standalone Configuration**](#cloud-managed-with-fit-cloud)

</details>

## Package Contents

<figure><img src="/files/XVuVznYU75vOunU2GyMS" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/P49jwMe118bYd4CwKNLP" alt=""><figcaption></figcaption></figure>

{% hint style="info" %} <mark style="color:$info;">If any item is missing or damaged, please contact your reseller.</mark>
{% endhint %}

## System Requirements

### <mark style="color:$primary;">**Web Browser**</mark>

&#x20;The following web browsers are recommended:

* Google Chrome (57.0.2987.110 and later)
* Microsoft Edge (80.0.361.103 and later)
* Mozilla Firefox (52.0 and later)

## Hardware Overview

### <mark style="color:$primary;">Front Panel — Ports & Buttons</mark>

<figure><img src="/files/qG8RJ5x6aAsqAVcfvJ5L" alt=""><figcaption></figcaption></figure>

### <mark style="color:$primary;">Rear Panel</mark>&#x20;

<figure><img src="/files/K3nqTKc5Pq7mpUerjH8a" alt=""><figcaption></figcaption></figure>

### LED Behavior Table

<figure><img src="/files/zTav19emKYOeYzlB4i13" alt=""><figcaption></figcaption></figure>

## Hardware Installation&#x20;

Before installation, make sure the installation site is clean, dry, well ventilated, and properly grounded.

### <mark style="color:$primary;">Installation Environment</mark>

Install the switch in a clean, dry, and well-ventilated location. Make sure the operating environment meets the following requirements:

<table><thead><tr><th width="276">Item</th><th>Requirement</th></tr></thead><tbody><tr><td>Operating Temperature</td><td>0°C to 50°C</td></tr><tr><td>Storage Temperature</td><td>-40°C to 70°C</td></tr><tr><td>Relative Humidity</td><td>5% to 95%, non-condensing</td></tr><tr><td>Power Input</td><td>AC 100–240V, 50/60Hz</td></tr></tbody></table>

To ensure reliable operation, keep the switch away from excessive dust, direct sunlight, heat sources, high humidity, and strong electromagnetic interference sources.

### <mark style="color:$primary;">Installation Preparation</mark>

Before installing the switch, verify that the package contents are complete and prepare the required tools.

Recommended tools:

* Phillips screwdriver
* Flat-head screwdriver
* ESD wrist strap

Use the mounting brackets and screws provided with the product. Standard network cables, fiber cables, and compatible transceivers should be used for installation.

### <mark style="color:$primary;">Grounding the Switch</mark>

Before powering on the switch, connect the grounding point on the rear panel to a proper earth ground.

Proper grounding helps protect the device from electrical surges, electromagnetic interference, and potential safety risks.

### <mark style="color:$primary;">**Safety Information**</mark>

* Follow all safety instructions to prevent device damage or personal injury.
* Do not block ventilation openings.
* Keep the device away from excessive heat, moisture, conductive materials, and flammable materials.
* Ensure proper grounding before operation.
* Use properly grounded power outlets with overload protection.
* Do not open the switch chassis.
* Disconnect power before moving, servicing, or inspecting the device.
* Do not look directly into optical transceiver ports or fiber connectors while the device is operating.
* Use appropriate ESD protection when handling internal components.
* Install the device in a clean and well-ventilated environment.
* Inspect the installation environment periodically to ensure safe operation.
* In an emergency, disconnect power immediately.

{% hint style="warning" %} <mark style="color:$warning;">**Caution:**</mark>

Electrical faults, such as leakage current, power arcing, improper grounding, overload, or short circuit, may cause electric shock, fire, equipment damage, or personal injury. If an electrical emergency occurs, disconnect power immediately and seek professional assistance.
{% endhint %}

### <mark style="color:$primary;">Rack Mount Installation</mark>

The ECS8830F is designed for installation in a standard 19-inch equipment rack.

1. Attach the **mounting brackets** to both sides of the switch using the supplied **bracket screws**.

<figure><img src="/files/EQeR5y7JU7PmGgtBpoBZ" alt=""><figcaption><p><em>*The display model number may be varied according to different models.</em></p></figcaption></figure>

2. Place the switch into the rack and secure it using rack mounting screws.
3. Ensure sufficient space around the switch for proper airflow and heat dissipation.

<figure><img src="/files/WxLoJT5K7wEXxJD7dpEf" alt=""><figcaption><p><em>*The display model number may be varied according to different models.</em></p></figcaption></figure>

{% hint style="warning" %}
Important:

* Do not block ventilation openings.
* Do not place objects on top of the switch.
* For additional stability, using a rack shelf is recommended.
  {% endhint %}

The mounting brackets are designed to secure the switch to the rack and are not intended to support the full weight of the device. For additional stability, using a rack shelf or tray is recommended.

## <mark style="color:blue;">**Power On Device**</mark>&#x20;

Before powering on the switch, make sure the power source is properly grounded and the input voltage is within the supported range.

Connect the supplied power cord to the AC power socket on the rear panel of the switch, then plug the other end into a reliable AC power outlet.

The switch supports the following power input:

| Item        | Specification        |
| ----------- | -------------------- |
| Power Input | AC 100–240V, 50/60Hz |

After power is applied, the switch performs a self-test and starts up automatically.&#x20;

For more reliable operation, using an uninterruptible power supply (UPS) is recommended.

{% hint style="info" %}
Improper grounding, unstable input voltage, or power surges may cause system errors or hardware damage.
{% endhint %}

<figure><img src="/files/9ey5f010vrnyAteVET2b" alt=""><figcaption></figcaption></figure>

## <mark style="color:blue;">Management Plane</mark>

EnGenius Cloud To-Go provides flexibility to manage your devices based on your network planning and deployment.

Option A: **Cloud Management**&#x20;

Option B: **Standalone Configuration**&#x20;

### <mark style="color:$primary;">**Cloud Management**</mark>

Manage and monitor the switch through the **EnGenius Cloud To-Go** with a mobile app or through the web portal.

**EnGenius Cloud To-Go** (iOS/Android)

:arrow\_down: [Download the Cloud To-Go mobile app here](https://apps.apple.com/us/app/engenius-cloud-to-go/id1212696440)

<figure><img src="/files/7kbPOSDtSIvqvCxrxqCM" alt=""><figcaption></figcaption></figure>

### <mark style="color:$primary;">**Standalone Configuration**</mark>&#x20;

You can locate the computer, connect to the same network (subnet) as the switch and use the web browser to access the device's local web GUI page for configurations whenever the device is in **Standalone mode.**&#x20;

## <mark style="color:blue;">**Option A:**</mark> <mark style="color:blue;"></mark><mark style="color:blue;">Configure with EnGenius Cloud</mark>

### <mark style="color:$primary;">**Step1: Register Device**</mark>

You can register the device either by **Cloud To-Go** **mobile app** or the **EnGenius Cloud platform.**

#### <mark style="color:$info;">**Cloud To-Go**</mark> <mark style="color:$info;"></mark><mark style="color:$info;">Mobile App</mark>

You can register the switch with the **Cloud To-Go** **app.**

1. Open and log in to the **EnGenius Cloud To-Go** mobile app.&#x20;
2. Scan the QR code on the back of the device via the app.

<figure><img src="/files/Z1BqVUu5qj0g985ZDaI4" alt=""><figcaption></figcaption></figure>

3\. If the camera successfully scans a QR code, the app will display the Device Information. You could tap "**Register**" to complete the Registration.

4\. Registered devices will be shown on the ***Inventory\&License*** page. Slide left the device and click "**Add to Network**" add the device to your personalized Network.

<figure><img src="/files/XfSKgE2jXJPE8qC2bXlr" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}
**Network**: Management domain shared same configurations within EnGenius Clou&#x64;**.**
{% endhint %}

#### <mark style="color:$info;">EnGenius Cloud Platform</mark>

1. Login into the **EnGenius Cloud Platform**: <https://cloud.engenius.ai/>
2. Go to the ***home > Inventory*** page and click "**Register Device**".
3. Enter the **Serial Number** of the device(s) for device registration. Please refer to ["User Manual-Registering Devices to Organization".](https://docs.engenius.ai/engenius-cloud/getting-started/device-onboarding)

<figure><img src="/files/ABSAPX4eLQJFMVusQIcB" alt=""><figcaption></figcaption></figure>

&#x20; 4\. Select the registered device and click "**Assign to Network**" to add the device to your personalized Network.&#x20;

{% hint style="info" %} <mark style="color:blue;">**Network**</mark><mark style="color:blue;">:</mark> Management domain shared same configurations within EnGenius Cloud<mark style="color:blue;">**.**</mark>
{% endhint %}

### <mark style="color:$primary;">Step 2: Connect to EnGenius Cloud</mark>

The switch supports management access through either the dedicated **MGMT Port** or the **front-panel ports**.

<table><thead><tr><th width="184">Interface</th><th>Default Setting</th></tr></thead><tbody><tr><td>MGMT Port</td><td>IP Address: 192.168.100.1 / 255.255.255.255</td></tr><tr><td>Front-Panel Ports</td><td>All front-panel ports are members of VLAN 1 by default. The VLAN 1 interface operates as a DHCP client.</td></tr></tbody></table>

<figure><img src="/files/KPd3GFnmAC47Levv8Jjr" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}
**Note:** The MGMT Port is a dedicated out-of-band management interface and operates independently from all front-panel VLAN interfaces. It does not participate in Layer 2 switching or Layer 3 routing, and traffic is not forwarded between the MGMT Port and any front-panel VLAN interface.
{% endhint %}

#### <mark style="color:$info;">EnGenius Cloud Connected</mark>

Once the device is powered on and ready to connect to the Internet, It will automatically download the default configuration settings from EnGenius Cloud for automated provisioning.&#x20;

{% hint style="info" %}
When the Switch is connected to the EnGenius Cloud Platform for the first time, it will automatically check the latest available firmware. If the firmware upgrade is required, it might take **8\~10 minutes** to complete the process.
{% endhint %}

### <mark style="color:$primary;">**Step 3: Manage with the EnGenius Cloud**</mark>

Log in to the [<mark style="color:blue;">**EnGenius Cloud**</mark>](https://cloud.engenius.ai/) <mark style="color:blue;">**Platform**</mark> to configure detailed settings. For more information, please refer to [User Manual](https://docs.engenius.ai/engenius-cloud/)**.**

<figure><img src="/files/nGpeE1X5MeTZ1wmjn0NP" alt=""><figcaption></figcaption></figure>

### <mark style="color:$primary;">Regulatory Statement</mark>

{% hint style="warning" %} <mark style="color:$warning;">**Warning:**</mark>\ <mark style="color:$info;">This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.</mark>
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://doc.engenius.ai/home-engenius-qsg-library/engenius-cloud-qsg/cloud-switch/ecs8830f.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.