EHR320

GenVo Dual-Band BE3600 Wi-Fi 7 Dual-Band Mesh Router

GenVo One

GenVo Dual-Band BE3600 Wi-Fi 7 Mesh Router

Model: EHR320

• Wi-Fi 7 Dual-Band BE3600 for faster, more efficient performance
• EasyMesh R6 supports up to four nodes for wider coverage
• Cloud Management via the EnGenius GenVo App

Content Quick Links

• Package Contents
• Hardware Overview
• System Installation

Package Contents

Hardware Overview

Ports

Reset Button

• Restore Factory Defaults: Press and hold the reset button for over 6 seconds until the Front LED starts fast flashing. The device will then automatically reset to its factory default settings.

LED Behavior Table

LED Color	LED Behavior	Status / Condition	Description
White	Blinking	Powering On	The device is powering on and initializing.
White	Solid On	System Ready	The device is ready for operation.
Blue	Blinking	Bluetooth Pairing Mode / Mesh Pairing Mode	The device is in Bluetooth pairing mode and ready to connect with other devices.
Blue	Solid On	Bluetooth Connected	The device is successfully connected via Bluetooth.
Green and Blue	Alternating Green and Blue Blinking	Firmware Update in Progress	A firmware update is currently in progress.
Red	Solid On	Internet Not Available / Hardware Error	The device has detected that internet connection is not available, or has encountered a hardware malfunction or error.

LED indicator

The EHR320 uses a single multi-color LED to indicate power, connection, and system status.

System Installation

1

Download the EnGenius GenVo App

Download the EnGenius GenVo App from the App Store or Google Play. Sign in or create an EnGenius account to get started.

Mobile App:

EnGenius GenVo (iOS/ Android supported)

⬇️ Download the GenVo mobile app here

2

Power On the Mesh Router

Connect the included power adapter and turn on the router. Wait for the LED to indicate the device is booting up.

3

Connect the WAN Port

Use an Ethernet cable to connect the yellow WAN port to your modem or internet source.

Ensure the cable is inserted into the correctly labeled port.

4

Follow the App Instructions

Open the EnGenius GenVo App and follow the on-screen instructions to complete setup. The app will guide you through pairing, network creation, and adding additional mesh nodes.