> For the complete documentation index, see [llms.txt](https://doc.engenius.ai/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://doc.engenius.ai/home-engenius-qsg-library/jp/engenius-cloud-qsg-jp/cloud-ai-camera/jp-ecc120-qsg/kuraudo.md).

# クラウド管理

### <mark style="color:blue;">ステップ1: デバイスの登録とネットワークへの割り当て</mark>

デバイスは「**Cloud どこでも」モバイルアプリ**または**EnGenius Cloud管理プラットフォーム** で登録できます。

#### <mark style="color:blue;">「</mark><mark style="color:blue;">**Cloud どこでも」アプリ**</mark>

1. **EnGenius 「Cloud どこでも」** を起動し、ログインします。

2. アプリでデバイス背面に記載された **QRコード** をスキャンします。

   ![QRコードをスキャンしてデバイス登録](https://2147014479-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F0ianJriebZhPPDZWx1Rc%2Fuploads%2FvFKHVXfxhyVWiM9qyIU7%2FECC120%20-%20Scan%20QR%20Code.png?alt=media\&token=adb59d84-0572-4028-acec-7ddf3d260fc3)

3. カメラのQRコードを正常に読み取ると、アプリにデバイス情報が表示されます。\
   　「**登録**」をタップして登録を完了します。

4. 「登録完了」と表示されたら、デバイス名を入力し、**\[今すぐネットワークに割り当てる]** をタップしてネットワークサイトに割り当てます。

   ![デバイス登録](https://2147014479-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F0ianJriebZhPPDZWx1Rc%2Fuploads%2F1HbV9xhZ1Zsmj1JPprLp%2F1-Camera-ECC120.png?alt=media\&token=041528fb-497b-43e9-8cc3-a60a33ef75e8)

5. **\[インベントリ & ライセンス]** ページで登録済みデバイスを探し、割り当てたいデバイスを左にスワイプして **\[新しいネットワークに割り当て]** をクリックします。\
   ネットワーク一覧から割り当て先を選択し、**\[適用]** をクリックしてください。割り当てが完了したら **\[次へ]** をクリックします。

   ![デバイスがネットワークに割り当て](https://2147014479-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F0ianJriebZhPPDZWx1Rc%2Fuploads%2FQRBXeoNY27f46U5PjKdi%2F2.png?alt=media\&token=dd5d6954-4e2b-4582-8f88-955c81d83843)

6. デバイスがインターネットに接続できるように、デバイスの電源を投入し、カメラをネットワーク機器に接続します。

7. 最後に **\[セットアップを完了]** をクリックすると、デバイスのセットアップが完了します。\
   **\[完了]** をクリックして設定プロセスを終了します。

   <figure><img src="https://2147014479-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F0ianJriebZhPPDZWx1Rc%2Fuploads%2F0MV1IYtLmSV1HhErfncS%2F3-Camera.png?alt=media&amp;token=a5929ba8-c2fa-475d-b2b0-9b14f8c37ea6" alt=""><figcaption><p>セットアップ完了</p></figcaption></figure>

#### <mark style="color:blue;">**EnGenius Cloud 管理プラットフォーム**</mark>

1. [EnGenius Cloud](https://cloud-jp.engenius.ai/)にログインします。
2. **「組織（**&#x30AA;ーガニゼーショ&#x30F3;**）」 > 「在庫とライセンス」** ページに移動し、**「デバイスを登録」** をクリックします。
3. 登録するデバイスの **シリアル番号** を入力します（1行に1台分入力）。詳細は[「Cloud ユーザーマニュアル＞はじめに ＞ オーガニゼーションにデバイスを追加」 ](https://doc.engenius.ai/home-cloud-user-manual/jp/getting-startedmaru/adding-devices-to-inventorynidebaisuwosuru)を参照してください。

![デバイスのシリアル番号による登録](https://2147014479-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F0ianJriebZhPPDZWx1Rc%2Fuploads%2FOHPWryb22ZCn1U0j81OQ%2FCloud%20-%20Register.png?alt=media\&token=fb6a7e4c-3b81-49bb-b3f7-dd4145d82e36)

4. 登録済みデバイスを選択し、**「ネットワークに割り当てる」** をクリックして、任意の管理ネットワークに追加します。

![選択したデバイスの管理ネットワークへの割り当て](https://2147014479-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F0ianJriebZhPPDZWx1Rc%2Fuploads%2FzOgJvgUjwHkHZ556mLuU%2FCloud-Assign-to-Network.jfif?alt=media\&token=56d1650e-b22c-4a04-bdb9-17d4e58cae74)

### <mark style="color:blue;">ステップ2: デバイスの電源投入</mark>&#x20;

EnGenius Cloud カメラは、以下のいずれかの方法で給電できます。

* **EnGenius Cloud PoE スイッチ** または **IEEE 802.3af / 802.3at PoE+ 対応スイッチ**
* **EnGenius PoE インジェクター**（EPA5006GP / EPA5006GAT）

#### <mark style="color:blue;">PoEスイッチを使用する場合</mark>

EnGenius Cloud カメラの Ethernet ケーブルを PoEスイッチの PoEポートに直接接続します。

![PoEスイッチからの電力供給](https://2147014479-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F0ianJriebZhPPDZWx1Rc%2Fuploads%2FI3A7IwcunvuD0zt5xPav%2FECC120%20-%20%20Power%20by%20PoE%20Switch.png?alt=media\&token=e13c5a84-5c4f-4289-b734-94c86ce6b271)

#### <mark style="color:blue;">PoE アダプターで給電する場合</mark>

(A) Ethernetケーブルの片端をカメラの LAN（PoE）ポートに接続し、もう一方をPoEアダプターのPoEポートに接続します。\
(B) PoEアダプターの電源ケーブルを接続し、コンセントに差し込みます。\
(C) 2本目のEthernetケーブルを PoEアダプターのLANポートとLAN環境に接続します。

{% hint style="info" %}
使用するEthernetケーブルは Cat5/Cat5e UTPまたはSTP RJ45規格に対応している必要があります。
{% endhint %}

<figure><img src="https://2147014479-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F0ianJriebZhPPDZWx1Rc%2Fuploads%2FBTh8oiUctpg0BGzbFLi9%2FECC120%20-%20Power%20by%20PoE%20Adapter.png?alt=media&amp;token=a0404b00-e644-46c8-bf55-73c380158890" alt=""><figcaption><p>PoEアダプターからの電力供給</p></figcaption></figure>

{% hint style="warning" %}
ご注意：電源コードはPoEアダプターに同梱されている専用品をご使用ください。

この電源コードは他の電気機器では使用できません。
{% endhint %}

### <mark style="color:blue;">ステップ3: EnGenius Cloudへの接続</mark>

デバイスの電源が入り、インターネット接続が可能になると、LEDインジケーターが *<mark style="background-color:blue;">**点灯（Solid On）**</mark>* します。これによりデバイスは EnGenius Cloud に接続され、クラウドから初期設定が自動でダウンロードされます。

{% hint style="warning" %}
初めて接続する場合、最新ファームウェアの確認と更新が自動で行われます。\
更新が必要な場合、完了までに約8〜10分かかります。更新中はLEDインジケーターが **0.5秒間隔で***<mark style="background-color:orange;">**点滅**</mark>***（Flashing）** します。
{% endhint %}

### <mark style="color:blue;">ステップ4: EnGenius Cloudによる管理</mark>

[EnGenius Cloud](https://cloud-jp.engenius.ai/)プラットフォームにログインし、詳細設定を行います。詳細は[「](https://docs.engenius.ai/engenius-cloud-jp)[Cloud ユーザーマニュアル](https://docs.engenius.ai/engenius-cloud-jp)[」](https://docs.engenius.ai/engenius-cloud-jp)を参照してください。

![EnGenius Cloud ダシューボード](https://2147014479-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F0ianJriebZhPPDZWx1Rc%2Fuploads%2FGrd1fKBA5PEoAgsFpKzb%2FCloud_dashboard.avif?alt=media\&token=056454f5-a0cc-40e2-8a1e-c25f77e9a75f)

{% hint style="warning" %}
他の用途でカメラを使用する場合は、まずEnGenius Cloudで当該カメラを **パーソナライズされたネットワークから削除（Remove）** し、**登録解除（Deregister）** してください。その後カメラをリセットしてください。

ネットワークからの削除および登録解除の手順については、 Cloud User Manual (日本語) 「[デバイス／ライセンス管理](https://doc.engenius.ai/home-cloud-user-manual/jp/managing-organizations/managing-device-inventory)」 をご参照ください。
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://doc.engenius.ai/home-engenius-qsg-library/jp/engenius-cloud-qsg-jp/cloud-ai-camera/jp-ecc120-qsg/kuraudo.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
