Minimum System Requirements

1. Hardware Requirements

The more devices managed by the EPC, the greater the required hardware capacity. Please refer to the following guidelines to select a suitable hardware for your EPC

PC/server with Minimum Specs:

Platform: X86-based PC, Server, or Cloud Instance

Support for EPC in ARM-based platform is still under survey.

Device Quantity	100	3,000
Requirements	1 core CPU (Intel i3, AMD R3 or above) 2GB ram 20GB HDD	8 core CPU (Intel i3, AMD R3 or above) 32GB ram 30GB HDD

Software needed

1. EPC is packaged as a docker container which can be run in most of standard Linux distributions.

2. VM with Linux installed should be able to install EPC with simple commands.

3. Windows 11 64bit 22H2 or later with WSL2 enabled can also install docker desktop to run EPC.

Follow WSL installation guide to prepare operation environment.

2. Operating System Requirements

EPC is packaged as a docker container which can be run in most of standard Linux distributions.

Suggested OS environment:

• Ubuntu: 20.04.3 LTS(Server) or above

• Debian: 10.6 or above

Note 1: sudo is required before EPC installation.

Note 2: System time change is not allowed after EPC was installed.

3. Device firmware version requirement

To be managed by EPC, device firmware must be greater than following versions:

Type	Model	Minimum firmware version
Cloud AP	ECW-Lite	v1.x.0
Cloud AP	ECW120/160	v1.3.75
Cloud AP	All other models	v1.x.56
Fit AP	EWS-Fit	v1.x.65
Cloud Switch	ECS-Lite	v1.1.0
Cloud Switch	ECS	v1.2.60
Fit Switch	EWS-Fit	v2.0.10

4. Internet Connection

Although EPC supports on-premises operating, but internet is required for following operations:

• EPC installation.

• Use FitRegister function to manage internet devices.

• Enable Cloud registration for license assignment and data backup.