# ECC120

## Cam5MP Bullet IP66 256GB

## <mark style="color:blue;">Introduction</mark>

This Quick Start Guide is designed to guide you through the installation of the **Cam5MP Bullet IP66 256GB** Camera, model **ECC120**, including hardware mounting and configuration.

{% hint style="info" %}

## <mark style="color:blue;">Cam5MP Bullet IP66 256GB</mark>

### Cloud-Managed AI Outdoor Bullet with 256GB Storage

#### **Model:**  ECC**120**

* Cloud Dashboard Management and Mobile App monitoring anywhere
* 5MP Sony Starvis sensor with HDR of crystal clear image quality day and night
* 3DNR and long IR distance of 30m of excellent night vision
* Camera durable 256GB storage for event and continuous recording 24x7
* IP66 and working -20°C \~ 50°C / -4°F \~ 122°F for tough weather conditions
* AI NPU of people and vehicle detection for instant alert, search, and statistics
  {% endhint %}

<details>

<summary><mark style="color:blue;">Content Quick Links</mark></summary>

* [**Hardware Overview**](#hardware-overview)
* [**Hardware Mounting**](#hardware-mounting)
* [**Configure with EnGenius Cloud**](#configure-with-engenius-cloud)

</details>

## <mark style="color:blue;">Package Contents</mark>

<figure><img src="/files/0qROtlgBEdx0Ib4I3Iwg" alt=""><figcaption></figcaption></figure>

## <mark style="color:blue;">System Requirements</mark>

Before signing up for the EnGenius Cloud Service or logging into the EnGenius Cloud Platform to manage your network, ensure that you have downloaded the correct app and are using a supported browser.&#x20;

### **Mobile App:**&#x20;

**EnGenius Cloud To-Go** (iOS/ Android supported)

:arrow\_down: [Download the Cloud To-Go mobile app here](https://qr.engenius.ai/app/cloud2go)

![](/files/Qh4f1YhvFAOGOXbv1KtF)

### **Web Browser:**&#x20;

* Google Chrome (57.0.2987.110 and later)
* Microsoft Edge (80.0.361.103 and later)
* Mozilla Firefox (52.0 and later)

## <mark style="color:blue;">**Network Requirements**</mark>

Before you get started, please make sure your network environment is DHCP-enabled. EnGenius Cloud Camera (ECC series) are default assigned an IP address dynamically by the DHCP server. If you have a firewall, it must allow outgoing connections on specific ports to certain IP addresses. For the firewall rule, please refer to the [User Manual](https://docs.engenius.ai/engenius-cloud/appendix/firewall-rule/firewall-rule). Cameras use the DNS server to resolve EnGenius cloud services to IP addresses to communicate with them. Your DHCP server tells the camera where the DNS server is on the network and the camera communicates with it.

## <mark style="color:blue;">Hardware Overview</mark>

<figure><img src="/files/CMczRG6ePVRvubZ74dfk" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}

#### **Reset Button:**&#x20;

* <mark style="color:blue;">**Reset to default**</mark><mark style="color:blue;">:</mark> Press and hold the reset button for over **10** seconds, and the **LED(PWR)** will start *<mark style="background-color:green;">Fast Flashing</mark>* (0.2 sec). Then, the device will be reset to factory default settings. To delete videos stored on the camera, press and hold the reset button for **15** seconds.
  {% endhint %}

### <mark style="color:blue;">LEDs</mark>

<figure><img src="/files/ZLUcyFiS205lgZd0kjSG" alt=""><figcaption></figcaption></figure>

## <mark style="color:blue;">Hardware Mounting</mark>

### Precaution

* Before setting up surveillance cameras, plan your system thoroughly and determine the placement and coverage of each camera. Also, decide whether to route cables through walls/ceilings (which involves drilling) or along walls/ceilings using baseboard cable channels.
* To ensure better image quality and extend the lifespan of your cameras, avoid exposing them to direct sunlight.
* Hire qualified technicians for maintenance and repairs. Ensure the equipment is powered off before performing any maintenance tasks.

**Important:** To prevent damage or scratches, remove the protective cover from the camera’s transparent Lens cover only after completing the entire installation.

{% hint style="info" %}
Before proceeding with hardware installation, **ensure the camera has been registered to EnGenius Cloud** (please refer to the [**Configure with EnGenius Cloud**](#configure-with-engenius-cloud) section). Alternatively, make sure to record the **product serial number**, as it will be required during the registration process.
{% endhint %}

### Hardware Installation

The camera can be mounted on the **Ceiling** and **Wall.** Please perform the steps for the appropriate installation:

1. Attach the waterproof connector to the Ethernet cable.
2. Place the O-ring onto the camera cable connector, then connect it to the Ethernet cable. The cable can be routed into a hole in the wall or ceiling for a clean installation.

<figure><img src="/files/4gqrNS0GFwAgomYniH6C" alt=""><figcaption></figcaption></figure>

3. Position the camera base on the ceiling or wall, and use any pair of opposing mounting slots to mark the drilling points. When installing, ensure the camera’s orientation and cable exit direction are properly aligned.

4. Drill holes at the marked locations, then secure the camera base to the mounting surface using the included anchors and screws.<br>

   <figure><img src="/files/jgJdpgZgIumhS3lSPlqJ" alt=""><figcaption></figcaption></figure>

5. To adjust the monitored image position, loosen the screw and manually set the camera’s pan, tilt, and rotation angles.

<figure><img src="/files/1BNmtb5sICrlFxm3iUHG" alt=""><figcaption></figcaption></figure>

## <mark style="color:blue;">**Configure with EnGenius Cloud**</mark>

### <mark style="color:blue;">**Step1: Register Device and Assign to Network**</mark>

You can register the device with the **Cloud To-Go** **mobile app** or the **EnGenius Cloud platform**.

#### <mark style="color:blue;">**Cloud To-Go Mobile App**</mark>

1. Open and log in to the **EnGenius Cloud To-Go** mobile app.&#x20;
2. Scan the QR code on the back of the device via the app.

![Scan QR-code for device registration](/files/Brnw3TfHBtkp09idsUXT)

3\. If the camera successfully scans a QR code, the app will display the device Information. You could tap "**Register**" to complete the Registration.

![Device registration ](/files/VHHbOoicuZTUnM192huY)

4\. Registered devices will be shown on the  ***Inventory\&License*** page. Slide left on the device and click "**Assign to New Network"** to add the device to your personalized Network.&#x20;

![Assign device to a managed Network](/files/up0DUYglxwhCe68qzbUI)

#### <mark style="color:blue;">**EnGenius Cloud Platform**</mark>

1. Log in to the **EnGenius Cloud Platform**: <https://cloud.engenius.ai/>.&#x20;
2. Go to the ***home > Inventory\&License*** page and click "**Register Device**".
3. Enter the **Serial Number** of the device(s) for device registration. Please refer to "[User Manual-Registering Devices to Organization](https://doc.engenius.ai/home-cloud-user-manual/getting-started/device-onboarding)".

![Register device(s) with device's Serial Number](/files/e1IYo636927Gt61xnNJe)

4\. Select the registered device and click "**Assign to Network**" to add the device to your personalized Network.&#x20;

![Assign selected device(s) to a managed Network](/files/6f1Xt2rW0gp6yk79Jlx6)

### <mark style="color:blue;">**Step2: Power On Device**</mark>&#x20;

The ECC120 cloud camera device can be powered by any of the following:

* EnGenius Cloud PoE Switch or 802.3af compliant Switch
* EnGenius PoE adaptor (EPA5006GP/EPA5006GAT)

#### <mark style="color:blue;">Connecting to a PoE Switch</mark>

Connect the Ethernet cable from the EnGenius Cloud Camera directly to the PoE port of the PoE switch.&#x20;

![Camera is powered by a PoE Switch](/files/Qw8R7sByW2f0RngxYpLy)

#### <mark style="color:blue;">Powered with a PoE Adapter</mark>

(A) Connect one end of the Ethernet cable into the LAN (PoE) port of EnGenius Cloud Camera and the other end to the PoE port on the PoE Adapter.&#x20;

(B) Connect the power cord with the PoE Adapter and plug the other end into an electrical outlet.&#x20;

(C) Connect the second Ethernet cable to the PoE adapter's LAN port and the other end to the LAN.

{% hint style="info" %}
Please ensure to use cat5/cat5e UTP/STP RJ45 Ethernet cables.
{% endhint %}

<figure><img src="/files/MoxjkDlDn8sDuHhVXb7Q" alt=""><figcaption><p>Camera is powered by a PoE Adapter</p></figcaption></figure>

### <mark style="color:blue;">Step3: Connect to the EnGenius Cloud</mark>

Once the device is powered on and ready to connect to the Internet, the **LED indicator** will stay *<mark style="background-color:blue;">Solid On</mark>*, which means the device is now connected to the EnGenius Cloud Platform. It will automatically download the default configuration settings from EnGenius Cloud for automated provisioning.&#x20;

{% hint style="warning" %}
When the **Camera** is connected to the EnGenius Cloud Platform for the first time, it will automatically check the latest firmware version available. If the **firmware upgrade** is required, it might take **8\~10 minutes** to complete the process. The **LED** indicator will be *<mark style="background-color:orange;">Flashing</mark> (every 0.5 sec)* till the process is finished.
{% endhint %}

### <mark style="color:blue;">**Step4: Manage with the EnGenius Cloud**</mark>

Log in to the [<mark style="color:blue;">**EnGenius Cloud**</mark>](https://cloud.engenius.ai/) <mark style="color:blue;">**platform**</mark> to configure detailed settings. For more information, please refer to the [User Manual](https://docs.engenius.ai/engenius-cloud/).

![EnGenius Cloud Dashboard](/files/Y65Ac9tyR7DCAjAxnA1A)

{% hint style="warning" %}
To remove a camera for other uses, you must first [<mark style="color:blue;">**Remove it from the personalized network**</mark>](https://docs.engenius.ai/engenius-cloud/managing-organizations/managing-device-inventory#removing-devices-from-a-network) in EnGenius Cloud, [<mark style="color:blue;">**Deregister**</mark>](https://docs.engenius.ai/engenius-cloud/managing-organizations/managing-device-inventory#de-registering-a-device-from-engenius-cloud) it, and then reset the camera.
{% endhint %}

##


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://doc.engenius.ai/home-engenius-qsg-library/engenius-cloud-qsg/ai-camera/ecc120.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.